home *** CD-ROM | disk | FTP | other *** search
- ECHO OFF
- CLS
- ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
- ECHO ▓▓ ▓▓
- ECHO ▓▓ This procedure will install ProComm on two floppy diskettes. To ▓▓
- ECHO ▓▓ install ProComm on a hard disk use the program HINSTALL. ▓▓
- ECHO ▓▓ ▓▓
- ECHO ▓▓ Before you begin, be sure you have 2 formatted diskettes labled ▓▓
- ECHO ▓▓ PROGRAM and DOCUMENT. If you do not have the diskettes ready, ▓▓
- ECHO ▓▓ or you do not wish to proceed with this installation, press ▓▓
- ECHO ▓▓ Ctrl-C now. ▓▓
- ECHO ▓▓ ▓▓
- ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
- PAUSE
- CLS
- ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
- ECHO ▓▓ ▓▓
- ECHO ▓▓ Be sure the distribution diskette is in drive A:. When prompted ▓▓
- ECHO ▓▓ to insert a diskette into drive B:, insert the PROGRAM diskette ▓▓
- ECHO ▓▓ into your drive. When prompted to insert a diskette into drive ▓▓
- ECHO ▓▓ A:, insert the distribution diskette into your drive. ▓▓
- ECHO ▓▓ ▓▓
- ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
- PAUSE
- CLS
- ECHO Creating program diskette ...
- a:prcmpgm *.* b: > nul
- ECHO Still creating program diskette ...
- a:prcmutil *.* b: > nul
- ECHO Almost done creating program diskette ...
- copy a:license.doc b: > nul
- CLS
- ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
- ECHO ▓▓ ▓▓
- ECHO ▓▓ The PROGRAM diskette is now completed. We are now ready to create ▓▓
- ECHO ▓▓ the DOCUMENT diskette. Make sure your distribution diskette is in ▓▓
- ECHO ▓▓ drive A:. When prompted to insert a diskette into drive B:, ▓▓
- ECHO ▓▓ insert the DOCUMENT diskette into your drive. When prompted to ▓▓
- ECHO ▓▓ insert a diskette into drive A:, insert the distribution diskette ▓▓
- ECHO ▓▓ into your drive. ▓▓
- ECHO ▓▓ ▓▓
- ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
- PAUSE
- CLS
- ECHO Creating document diskette ...
- a:prcmdoc *.* b: > nul
- ECHO Almost done creating document diskette ...
- copy a:license.doc b: > nul
- CLS
- ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
- ECHO ▓▓ ▓▓
- ECHO ▓▓ All done. To run ProComm, place the PROGRAM diskette that you have ▓▓
- ECHO ▓▓ just created in your active drive and type PROCOMM [Enter]. ▓▓
- ECHO ▓▓ ▓▓
- ECHO ▓▓ To view the documentation, place the DOCUMENT diskette into your ▓▓
- ECHO ▓▓ active drive and type TYPE PROCOMM.DOC [Enter]. Press Ctrl-S to ▓▓
- ECHO ▓▓ stop the display and any other key to resume it. ▓▓
- ECHO ▓▓ ▓▓
- ECHO ▓▓ To print the ProComm documentation, place the DOCUMENT diskette ▓▓
- ECHO ▓▓ into your active drive and type COPY PROCOMM.DOC PRN [Enter]. ▓▓
- ECHO ▓▓ Make sure you have plenty of paper before you start-- the manual ▓▓
- ECHO ▓▓ is over 100 pages long. ▓▓
- ECHO ▓▓ ▓▓
- ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓